Beschreibung
SignalSDR Pro is a compact software-defined radio for authorised penetration testing, RF research and technical education. It supports receiving, analysing and developing signals across a 70 MHz to 6 GHz tuning range, with two full-duplex transmit and receive channels. SignalLens also documents compatibility modes for ADALM-PLUTO and USRP B210 workflows, selected through an SD card.
Key features
- Wide tuning range: 70 MHz to 6 GHz.
- Dual full-duplex channels: two transmit and two receive channels.
- Hardware compatibility: supports documented ADALM-PLUTO and USRP B210 compatible modes.
- FPGA resources: 85,000 logic gates for programmable SDR applications.
- Connectivity: Gigabit Ethernet, USB 3.0, USB OTG, USB Type-C and a 40-pin GPIO header.
- Timing: built-in GPSDO and external clock reference support.
Technical details
- Transceiver chipset: Analog Devices AD9361.
- RF bandwidth: up to 56 MHz.
- Sample resolution: 12 bits.
- Sample rate: 61.44 MSPS.
- Transmit power: up to 10 dBm, depending on frequency.
- Boot option: SD card.
Compatibility and setup
The SignalSDR Pro boots from an SD card, allowing the selected compatible mode to load its FPGA bitstream, firmware and configuration. Manufacturer documentation covers ADALM-PLUTO and USRP B210 modes, as well as GNU Radio and Open5GS-related setup.
Buying in the UK and EU
SignalSDR Pro is available to UK and EU buyers with prices shown in GBP, EUR or USD and VAT handled at checkout. Transmitting is regulated under national radio rules and licence-exempt band conditions; receiving and analysing signals is the common lawful use, so review applicable requirements before transmitting.
Rezensionen
Es gibt noch keine Rezensionen.