Packet Squirrel Mark II

Description

Packet Squirrel Mark II is a compact Ethernet multi-tool for authorised security engagements, network research and education. Hak5 documents support for packet captures, VPN connections, remote access and reactive network payloads, with operation selected using the device mode switch. RedKit Labs is an authorised Hak5 reseller.

Key features

• Ethernet testing platform: designed for authorised network assessment and research.
• Payload-based operation: selected payloads run when the device boots.
• Network modes: supports NAT, bridge and jail modes, plus transparent and isolate modes.
• Packet capture: suitable for capturing network traffic during an authorised engagement.
• VPN connectivity: can connect to VPN servers and Hak5 Cloud C².
• Web interface and SSH: payloads can be run interactively through the web interface terminal or an SSH connection.
• Mode switch and pushbutton: the mode switch selects operation at boot, while holding the pushbutton for 5 to 10 seconds reboots the device.

Technical details

• Documentation applies to Packet Squirrel Mark II firmware 4.0.0 or newer.
• The network Ethernet port can obtain an IP address through DHCP in NAT, bridge and jail modes.
• Transparent and isolate modes do not obtain an IP address and are not reachable from the network.

Compatibility and setup

Connect the network Ethernet port to an internet-connected DHCP network, then use Arming and Configuration mode to access the web interface and networking settings. Hak5 documents web UI and SSH access for payload operation. Review the manufacturer’s current documentation for firmware, payload and Cloud C² requirements before deployment.

Buying in the UK and EU

Choose from Packet Squirrel MK2, Pro Bundle or Elite Bundle, with prices shown in GBP, EUR or USD and VAT handled at checkout. Use this device only on networks where testing is authorised, and review applicable network, privacy and computer misuse laws before use.