Proxmark 3 RDV4.01- Upgrade / Replacement Antenna

Beschrijving

The RFID Research Group Proxmark 3 RDV4.01 Upgrade / Replacement Antenna set replaces the original antenna assembly on compatible Proxmark 3 RDV4 hardware. It is intended for authorised RFID assessment, security research and education, including work with supported low-frequency and high-frequency tags.

Key features

• LF antenna with Q-Switch: switch between settings 14 and 7 for different reading and writing priorities.
• Q-Switch setting 14 is specified for up to 30% further read range during supported LF operations.
• Q-Switch setting 7 is specified to improve writing performance on T55XX and EM410XX tags.
• LF Frequency Switch: select 125 kHz or 134 kHz tuning for supported tag types.
• Includes an HF antenna with the improved performance specified for the Proxmark 3 RDV4.01 system.
• Uses six-layer printed circuit boards.

Technical details

• LF antenna with Q-Switch and Frequency Switch.
• Frequency selections: 125 kHz and 134 kHz.
• HF antenna included.
• Q-Switch settings: 14 and 7.
• Manufacturer: RFID Research Group.

Compatibility and setup

The set is compatible with the Proxmark 3 RDV4 platform and is designed as an upgrade for systems using the original RDV4 antennas. Confirm the hardware revision and follow the manufacturer’s installation guidance before fitting. Proxmark software, firmware, host operating system and any additional accessories are not specified here.

Buying in the UK and EU

RedKit Labs offers prices in GBP, EUR and USD, with VAT handled at checkout. This is an RF accessory, so UK and EU buyers must check applicable national radio rules and licence-exempt conditions before transmitting. Receiving and analysing authorised RFID activity is the common lawful use, and testing must have permission.