Descrizione
The Bus Pirate 5 Auxiliary Cable provides a direct connection from the Bus Pirate 5 auxiliary header to external test equipment during authorised hardware analysis, firmware research and electronics education. Its colour-coded individual leads help identify the available signals when connecting to a logic analyser or oscilloscope.
Key features
- Connects the Bus Pirate 5 auxiliary interface to external measurement equipment.
- Includes one 9-pin cable with colour-coded crimp housings.
- Provides separate leads for the Bus Pirate IO signals and ground.
- Designed for use with logic analysers, oscilloscopes and similar test equipment.
- Supplied without the separate jumper and Y-splitter cables.
Technical details
- 9-pin, 1.0mm SH-style female connector for the Bus Pirate 5 auxiliary header.
- Nine individual 2.54mm DuPont-style female connectors for connection to external equipment.
- Eight grey leads carry IO0 to IO7.
- One black lead provides ground.
- 30 AWG silicone cable.
- Approximately 170mm cable length.
Compatibility and setup
Connect the 1.0mm SH end to the Bus Pirate 5 auxiliary connector, then attach the individual DuPont leads to compatible analyser or oscilloscope inputs and ground. The Bus Pirate documentation identifies the auxiliary header as a tap point for IO0 to IO7 and ground. Confirm the signal arrangement and voltage requirements of the connected equipment before use.
Buying in the UK and EU
RedKit Labs lists this Bus Pirate accessory for UK and EU buyers with prices displayed in GBP, EUR or USD, with VAT handled at checkout. Use it only with hardware and interfaces you own or have permission to test, and check any applicable equipment and electrical safety requirements for your location.
Recensioni
Ancora non ci sono recensioni.