Descrizione
The RFID Research Group Proxmark 3 RDV4 BlueShark Standalone Module adds wireless connectivity and battery-powered operation to a compatible Proxmark 3 RDV4. In an authorised engagement, it supports standalone operation, offline RFID sniffing, offline reading and simulation without a USB connection to a computer.
Key features
- Bluetooth 2.0 with Enhanced Data Rate
- Rechargeable 400 mAh polymer lithium-ion battery
- Standalone operation for compatible Proxmark 3 RDV4 devices
- Offline sniffing, reading and simulation support
- Aluminium case with integrated heatsink
- Tempered glass cover
- Bluetooth communication with a typical distance of up to 6 m, depending on the environment and device orientation
- Supplied as a module upgrade only. The Proxmark 3 RDV4 is not included
Technical details
- Battery capacity: 400 mAh
- Charging current: 200 mA via USB
- Charging time: 2.5 hours
- Typical standby time: 3.5 hours
- Typical LF-on time: 2.9 hours
- Typical HF-on time: 50 minutes
- Bluetooth power: 4 dBm
- Bluetooth receiver sensitivity: -85 dBm at 2 Mbps
- Dimensions: 54.4 x 29.4 x 13.5 mm
- Weight: 24 g
Compatibility and setup
The module is compatible with Proxmark 3 RDV4 devices. RFID Research Group publishes the BlueShark Bluetooth and battery manual and maintains the Proxmark 3 firmware codebase, including BlueShark support. A compatible Proxmark 3 RDV4 and the relevant assembly and firmware instructions are required. The Proxmark 3 RDV4 itself is not included.
Buying in the UK and EU
Prices can be displayed in GBP, EUR or USD, with VAT handled at checkout where applicable. This is radio equipment or an RF accessory: transmitting is regulated by national radio rules and licence-exempt band conditions, while receiving and analysing are commonly lawful uses. Check applicable radio, RFID and access-tool laws before use.
Recensioni
Ancora non ci sono recensioni.