Descrizione
The Bus Pirate 5 KF141 Quick Connect adaptor provides a practical connection point for stripped wires during authorised hardware testing, protocol analysis and educational research. Its spring-clamp terminals hold wires without requiring a separate screw terminal, while the labelled pinout helps identify connections when working with compatible Bus Pirate 5 interfaces. Bus Pirate describes the adaptor as compatible with Bus Pirate 5, 5XL and 6 hardware.
Key features
- KF141 quick connector block for connecting stripped wires.
- Spring retention clamps operated by levers.
- Bright orange pin-name markings on the adaptor.
- Designed for quick wire connections to compatible Bus Pirate hardware.
- Useful for authorised testing of I2C, SPI, UART, 1-Wire and other supported serial interfaces when used with the relevant Bus Pirate device and firmware.
Technical details
- Connector type: KF141.
- Bus Pirate 5 uses a 2.54 mm, 10-pin main I/O connector.
- The manufacturer lists right-angle and vertical KF141 versions. This listing is the KF141 Quick Connect adaptor; no additional version is specified here.
Compatibility and setup
Use with a compatible Bus Pirate 5 interface and suitable stripped hookup wires. Connect the Bus Pirate to a host computer with USB-C for terminal access, then follow the manufacturer’s hardware and firmware documentation for the selected protocol.
Buying in the UK and EU
RedKit Labs displays prices in GBP, EUR or USD, with VAT handled at checkout. This is a passive connection adaptor, but any connected test equipment and target hardware must be used only with permission and within applicable electrical safety requirements.
Recensioni
Ancora non ci sono recensioni.